We recommend that you calculate the packaging cost of your valuable product not only by the unit cost of the bag you will use, but also by considering the resources you will spend on packaging your product. We have added a new solution to our range of solutions to reduce your packaging costs, such as InnoPack Perforated wrapping machine and easy-open pouches with very slippery static electricity. This time, whether the aim is to reduce the time and labor used to open the products in your stores or to enable the consumer to remove the packaging and reach your product quickly, we shorten the time to remove the product from the bag with the Vertical Perforated feature we have added to our product accessory range. You can add a difference to your packaging in terms of usage and aesthetics, and save time thanks to Vertical Perforation, which allows you to easily remove the dress or suit from the packaging without crumpling, especially for products with straps.

‘Carrier Bag is a product with very high tensile stress tolerance thanks to the raw material formulation used in its production. MDPEcarry, which has the same carrying capacity as the standard carrying bags used in the market but can be produced 50-60% thinner than its counterparts, provides up to 50% cost savings in carrying bag expenses to its users.

Due to the structure on the surface of MDPEcarry, it has the ability to hold the tapes used to close the mouth of the bags tightly and allows stacking on top of each other thanks to its minimum slippery surface.

Another important feature of our MDPEcarry product is that it is far ahead of other 1st quality or 2nd quality products in heat welding performance. The strong bottom weld seam, which is undoubtedly one of the most important issues in transportation bags, will never be a problem with our product.

We can produce your MDPEcarry carrying bag in any color, thickness, size you want, and if you wish, we can also print your logo on it with flexo printing.

Benefits

• High Carrying Capacity +
• Low Thickness = Up to 50% cost savings
• High Elasticity, Tear and Tear-Free
• Very Robust Bottom Weld Seam
• Strong Tape Holding Feature
• Ease of Stacking

InnoPack is a simple-to-use, multipurpose equipment made for hanging product packaging. It enables serial packaging. By accelerating packing up to five times faster than hand packaging and minimizing post-welding waste, it considerably lowers your packaging expenses. When you begin using it, it will become a necessary fixture.

Main Benefits of Perforated Wrapping Machine – InnoPack

For non-welded and up to 4-5 times for welded packaging, it can increase the number of packagings per employee.
It permits welding at the required length and reduces post-welding waste because of the moveable jaw box.

Even if the operator holds the jaw pressed for longer than is necessary, no burns develop in the weld, and the resistance does not burn because the jaw resistors contain a circuit breaker.
Since the temperature of the jaw resistance can be adjusted with the control, the most efficient working conditions can be achieved by setting the correct welding temperature in thin and thick bags, different packaging qualities such as LDPE, HDPE, MDPE, PP.
It can be easily used with all kinds of perforated packaging with or without welded sealing or open mouth packaging without welding.
Since the machine is switched on and off with the fuse button on the machine, there is no danger even if the plug is forgotten connected to the electricity.